Home > Floor Machines - All > Floor Burnishers/Buffers > Battery Powered
Sort By:
Page of 1
Advance Advolution 20B 20" Battery Buffer with Brand New Batteries Photo Tennant B7 27" Battery Powered Floor Buffer Photo Pioneer Eclipse PE300BU 20" Battery Buffer Photo
Advance Advolution 20” battery burnisher with the following features:
  • Brand new batteries: 36V battery system using 3 12V batteries wired in unison for long run time.
  • Battery charger
  • 20” burnishing pad spinning at 2000 rpms
  • Pad Assist model (as the pad spins on the floor, the friction helps pull the machine forward)
  • Passive vacuum bag and dust collection system built into the machine. Bag is housed under black lid in very front of the machine.
  • Burnishes between 17,600 and 24,000 square ft per hour
  • Self regulating pad pressure for even shine
  • Built in tip-back feature provides easy access for changing pads

For more information call Vince @ 319-472-3011 ext #1, or email vince@psjanitorial.com.

Tennant B7 27” Battery Powered Floor Buffer

Learn more about our high standards for refurbishing machines.

Features:

  • Low hours of usage
  • Practically brand new buffer at a refurbished machine price!
  • 27” Burnishing Pad spinning at 1875 rpms
  • 36V battery system using 6 6V batteries of 330 amp hour each for extended buffing times of up to almost 3 hours of continual use.
  • Passive vacuum bag and dust collection system built into the machine.
  • The Tennant B7 burnishes between 25,000 and 27,000 square ft per hour.
  • Buffer has self regulating pad pressure for even shine.
Included:
  • On-board battery charger
  • Installed brand new batteries!

For more information, contact Vince: 319-472-3011 x1 or vince@psjanitorial.com.

Brand new battery buffer!

Features:

  • Traction drive
  • Dust control filter system for clean, quiet, and efficient burnishing
  • Powered by three 12-volt 228 AH batteries, the PE300BU burnishes over 26,000 square feet (2400 square meters) while virtually eliminating unwanted noise
  • Clean, safe and effective, the PE300BU is a burnisher you can count on to maintain floors at any hour in any facility
    • SteadyOne™ technology maintains constant pad pressure and produces more consistent results
      • Unlike other machines using spring mechanisms that vary when a metal coil compresses or extends, SteadyOne™ automatically adjusts the deck as the pad wears to apply the same pad pressure throughout the burnishing operation.
      • Floor care professionals can now get the same one-pass results today ... and tomorrow.
    For more information, contact Vince: 319-472-3011 x1 or vince@psjanitorial.com.
    Pioneer Eclipse PE300BU 24" Battery Buffer Photo Pioneer Eclipse 30X Battery Powered Buffer Photo
    Brand new battery buffer!

    Features:
    • Traction drive
    • Dust control filter system for clean, quiet, and efficient burnishing
    • Powered by three 12-volt 228 AH batteries, this machine burnishes over 26,000 square feet (2400 square meters) while virtually eliminating unwanted noise
    • Clean, safe, effective
    • Uses SteadyOne™ technology to maintain constant pad pressure which produces more consistent results
    • Unlike other machines using spring mechanisms that vary when a metal coil compresses or extends, SteadyOne™ automatically adjusts the deck as the pad wears to apply the same pad pressure throughout the burnishing operation. Floor care professionals can now get the same one-pass results today and tomorrow!
    For more information, contact Vince: 319-472-3011 x1 or vince@psjanitorial.com.
    Brand new battery powered buffer!

    • Performance:
      • Burnish Width: 30 in, (76 cm)
      • Productivity: 42,900 sq. ft/hr, (3985 sq. m/hr)
      • Noise Level: 70 dBA
      • Battery Pack: 3 x 12V, 228 AH lead-acid batteries
      • Battery Charger: On-board, 25 amp with smart charge, diagnostic codes, and attached power cord.
      • Burnish Motor: 36V DC PM, 2.5 hp @ 2,000 rpm
      • Dust Control: On-board w/ washable cloth dust bag or disposable paper bag
      • Dust Skirt: Steel construction with replaceable wear edge
      • Burnish Counterbalance Mechanism: Constant force, (fluid), spring
      • # of Burnish Pads: 2
      • Type of Burnish Pads: 16in X-shape, (to reduce energy consumption, increase runtime, and increase performance.
    • Controls and Features:

      • Pad Change: Tilt back deck between 80 & 90 degrees with automatically locking safety latch
      • Traction Control: Squeeze handles with speed control knob and reverse button
      • On /Off Control: Key switch with removable key
      • Burnish Control: On / Off switch with automatic shut off if machine stops moving
      • Deck Lift: Automatic raise and lower when burnish motor engaged and disengaged, respectively. Must be mechanical system without actuator.
      • Battery Pack Connection: 175 amp quick-disconnect plug
    • Safety:
      • Rear Casters: Grey non-marking tread with parking brakes
      • Motor protection: Circuit breakers that you can reset
      • Unintended Operation: Operator inhibit feature @ start-up, (machine will not operate if traction device engaged as the key switch is turned on). Machine will not operate if batteries are being
      • Battery Discharge Shutdown: Burnish motor must be disabled when batteries reach 80% discharge
      • Motor Connection: All motors must be connected to the main harness via quick-disconnect plugs.
      • Battery Cables: 2 Awg, 600 V, stranded copper welding cable with lug terminals and protective boots
      • Decals: Machine must be equipped with decals warning of hazards associated with rotating pads and electrical shock.
      • Weight: Machine must weigh less than 640 lbs to minimize fatigue and risk.
    For more information, contact Vince: 319-472-3011 x1 or vince@psjanitorial.com.