Brand new battery powered buffer! For more information, contact Vince: 319-472-3011 x1 or email@example.com .
Pioneer Eclipse 30X Battery Powered Buffer-NEW MACHINE
- Pioneer Eclipse
Performance: Burnish Width: 30 in, (76 cm) Productivity: 42,900 sq. ft/hr, (3985 sq. m/hr) Noise Level: 70 dBA Battery Pack: 3 x 12V, 228 AH lead-acid batteries Battery Charger: On-board, 25 amp with smart charge, diagnostic codes, and attached power cord. Burnish Motor: 36V DC PM, 2.5 hp @ 2,000 rpm Dust Control: On-board w/ washable cloth dust bag or disposable paper bag Dust Skirt: Steel construction with replaceable wear edge Burnish Counterbalance Mechanism: Constant force, (fluid), spring # of Burnish Pads: 2 Type of Burnish Pads: 16in X-shape, (to reduce energy consumption, increase runtime, and increase performance. Controls and Features: Pad Change: Tilt back deck between 80 & 90 degrees with automatically locking safety latch Traction Control: Squeeze handles with speed control knob and reverse button On /Off Control: Key switch with removable key Burnish Control: On / Off switch with automatic shut off if machine stops moving Deck Lift: Automatic raise and lower when burnish motor engaged and disengaged, respectively. Must be mechanical system without actuator. Battery Pack Connection: 175 amp quick-disconnect plug Safety: Rear Casters: Grey non-marking tread with parking brakes Motor protection: Circuit breakers that you can reset Unintended Operation: Operator inhibit feature @ start-up, (machine will not operate if traction device engaged as the key switch is turned on). Machine will not operate if batteries are being Battery Discharge Shutdown: Burnish motor must be disabled when batteries reach 80% discharge Motor Connection: All motors must be connected to the main harness via quick-disconnect plugs. Battery Cables: 2 Awg, 600 V, stranded copper welding cable with lug terminals and protective boots Decals: Machine must be equipped with decals warning of hazards associated with rotating pads and electrical shock. Weight: Machine must weigh less than 640 lbs to minimize fatigue and risk.
- 1,500.00 LBS