Home > Floor Machines - All > Floor Burnishers/Buffers > Battery Powered > Pioneer Eclipse Battery Powered Burnishers/Buffers
Sort By:
Page of 1
Pioneer Eclipse PE300BU 20" Battery Buffer Photo Pioneer Eclipse PE300BU 24" Battery Buffer Photo Pioneer Eclipse 30X Battery Powered Buffer Photo
Brand new battery buffer!

Features:

  • Traction drive
  • Dust control filter system for clean, quiet, and efficient burnishing
  • Powered by three 12-volt 228 AH batteries, the PE300BU burnishes over 26,000 square feet (2400 square meters) while virtually eliminating unwanted noise
  • Clean, safe and effective, the PE300BU is a burnisher you can count on to maintain floors at any hour in any facility
    • SteadyOne™ technology maintains constant pad pressure and produces more consistent results
      • Unlike other machines using spring mechanisms that vary when a metal coil compresses or extends, SteadyOne™ automatically adjusts the deck as the pad wears to apply the same pad pressure throughout the burnishing operation.
      • Floor care professionals can now get the same one-pass results today ... and tomorrow.
    For more information, contact Vince: 319-472-3011 x1 or vince@psjanitorial.com.
    Brand new battery buffer!

    Features:
    • Traction drive
    • Dust control filter system for clean, quiet, and efficient burnishing
    • Powered by three 12-volt 228 AH batteries, this machine burnishes over 26,000 square feet (2400 square meters) while virtually eliminating unwanted noise
    • Clean, safe, effective
    • Uses SteadyOne™ technology to maintain constant pad pressure which produces more consistent results
    • Unlike other machines using spring mechanisms that vary when a metal coil compresses or extends, SteadyOne™ automatically adjusts the deck as the pad wears to apply the same pad pressure throughout the burnishing operation. Floor care professionals can now get the same one-pass results today and tomorrow!
    For more information, contact Vince: 319-472-3011 x1 or vince@psjanitorial.com.
    Brand new battery powered buffer!

    • Performance:
      • Burnish Width: 30 in, (76 cm)
      • Productivity: 42,900 sq. ft/hr, (3985 sq. m/hr)
      • Noise Level: 70 dBA
      • Battery Pack: 3 x 12V, 228 AH lead-acid batteries
      • Battery Charger: On-board, 25 amp with smart charge, diagnostic codes, and attached power cord.
      • Burnish Motor: 36V DC PM, 2.5 hp @ 2,000 rpm
      • Dust Control: On-board w/ washable cloth dust bag or disposable paper bag
      • Dust Skirt: Steel construction with replaceable wear edge
      • Burnish Counterbalance Mechanism: Constant force, (fluid), spring
      • # of Burnish Pads: 2
      • Type of Burnish Pads: 16in X-shape, (to reduce energy consumption, increase runtime, and increase performance.
    • Controls and Features:

      • Pad Change: Tilt back deck between 80 & 90 degrees with automatically locking safety latch
      • Traction Control: Squeeze handles with speed control knob and reverse button
      • On /Off Control: Key switch with removable key
      • Burnish Control: On / Off switch with automatic shut off if machine stops moving
      • Deck Lift: Automatic raise and lower when burnish motor engaged and disengaged, respectively. Must be mechanical system without actuator.
      • Battery Pack Connection: 175 amp quick-disconnect plug
    • Safety:
      • Rear Casters: Grey non-marking tread with parking brakes
      • Motor protection: Circuit breakers that you can reset
      • Unintended Operation: Operator inhibit feature @ start-up, (machine will not operate if traction device engaged as the key switch is turned on). Machine will not operate if batteries are being
      • Battery Discharge Shutdown: Burnish motor must be disabled when batteries reach 80% discharge
      • Motor Connection: All motors must be connected to the main harness via quick-disconnect plugs.
      • Battery Cables: 2 Awg, 600 V, stranded copper welding cable with lug terminals and protective boots
      • Decals: Machine must be equipped with decals warning of hazards associated with rotating pads and electrical shock.
      • Weight: Machine must weigh less than 640 lbs to minimize fatigue and risk.
    For more information, contact Vince: 319-472-3011 x1 or vince@psjanitorial.com.