Home > Floor Burnishers/Buffers >

Pioneer Eclipse 30X Battery Powered Buffer-NEW MACHINE
Pioneer Eclipse 30X Battery Powered Buffer Photo
  • Free shipping only applies to a U.S. business location with a receiving dock or a forklift for unloading.
  • Shipping to a non-commercial U.S. address, Canada, or Mexico? Additional charges apply; call for details.
Our Price: $7,136.00

Product Code: PE300BU-30X

Brand new battery powered buffer!

  • Performance:
    • Burnish Width: 30 in, (76 cm)
    • Productivity: 42,900 sq. ft/hr, (3985 sq. m/hr)
    • Noise Level: 70 dBA
    • Battery Pack: 3 x 12V, 228 AH lead-acid batteries
    • Battery Charger: On-board, 25 amp with smart charge, diagnostic codes, and attached power cord.
    • Burnish Motor: 36V DC PM, 2.5 hp @ 2,000 rpm
    • Dust Control: On-board w/ washable cloth dust bag or disposable paper bag
    • Dust Skirt: Steel construction with replaceable wear edge
    • Burnish Counterbalance Mechanism: Constant force, (fluid), spring
    • # of Burnish Pads: 2
    • Type of Burnish Pads: 16in X-shape, (to reduce energy consumption, increase runtime, and increase performance.
  • Controls and Features:

    • Pad Change: Tilt back deck between 80 & 90 degrees with automatically locking safety latch
    • Traction Control: Squeeze handles with speed control knob and reverse button
    • On /Off Control: Key switch with removable key
    • Burnish Control: On / Off switch with automatic shut off if machine stops moving
    • Deck Lift: Automatic raise and lower when burnish motor engaged and disengaged, respectively. Must be mechanical system without actuator.
    • Battery Pack Connection: 175 amp quick-disconnect plug
  • Safety:
    • Rear Casters: Grey non-marking tread with parking brakes
    • Motor protection: Circuit breakers that you can reset
    • Unintended Operation: Operator inhibit feature @ start-up, (machine will not operate if traction device engaged as the key switch is turned on). Machine will not operate if batteries are being
    • Battery Discharge Shutdown: Burnish motor must be disabled when batteries reach 80% discharge
    • Motor Connection: All motors must be connected to the main harness via quick-disconnect plugs.
    • Battery Cables: 2 Awg, 600 V, stranded copper welding cable with lug terminals and protective boots
    • Decals: Machine must be equipped with decals warning of hazards associated with rotating pads and electrical shock.
    • Weight: Machine must weigh less than 640 lbs to minimize fatigue and risk.
For more information, contact Vince: 319-472-3011 x1 or vince@psjanitorial.com.

Share your knowledge of this product. Be the first to write a review »