Floor Stripping Machines
Find Your Battery
Commercial Floor Stripping Machines for Full Floor Restoration
Stripping is the reset point in a floor care program, pulling old floor finish, wax, and embedded dirt off the substrate so a fresh coating bonds cleanly instead of sealing stains under it. The floor stripping machines in this part of our floor machines lineup are built to take the labor out of what is otherwise the most time consuming task on the schedule, from detail work along baseboards to propane powered stripping across large amounts of open commercial floors.
Low Speed Swing, Propane, and Battery Machines Sized 17 to 30 Inch
Aztec, Onyx, and Pioneer Eclipse machines run from 17 to 30 inch pad sizes, so you can match the machine to your cleaning path instead of forcing one unit to cover every floor in the building. Low speed and dual speed electric swing machines remain the standard for finish stripping, turning a stripping pad with enough side torque to break wax loose without gouging floor coverings, while propane strip and polishing machines cover wide open square footage with no cord to drag and no batteries to recharge mid shift. Battery powered edge machines handle perimeters and corners, and separate applicator and slurry recovery machines split the chemical and pickup steps. Filter on pad size, power type, speed, weight, and onboard tank.
Warranty on Every Machine, Financing, and Specialists Who Know This Equipment
Every machine sold here is backed by industry leading warranty coverage, and financing options are available so a stripping machine can be budgeted against labor hours rather than paid out of a single capital line. Our floor care specialists will help you size the machine to your floor surfaces and identify the right pads and accessories before you buy, and they can point you toward manuals, how to articles, and demo videos for equipment already in service. Once the old finish is off, pair the machine with a floor buffer to polish the new coating and an automatic floor scrubber for routine maintenance, or look at refurbished floor stripping machines if a reconditioned unit fits the budget better. Contact us for a quote or a straight recommendation.
Floor Stripping Machine FAQs
What size floor stripper machine should I buy?
Match pad size to your open floor area: 17 and 20 inch machines work well in restrooms, corridors, and cluttered rooms, while 24 to 30 inch propane machines are the productive choice for large commercial floors.
Should I choose corded electric, propane, or battery power?
Corded electric suits smaller areas with reliable outlets, propane covers big square footage without cords or charging downtime, and battery machines are best for edge and baseboard detail work.
Which floor surfaces can these machines strip?
Resilient floor coverings such as VCT, vinyl, linoleum, laminate, and rubber strip readily with the right pad and chemistry, while wood, marble, and polished concrete call for low speed operation and gentler chemicals.
What is the difference between a finish stripping and a material stripping machine?
A finish stripping machine removes old wax and acrylic floor finish from the surface, while a material stripping machine mechanically scrapes glued down carpet and flooring off the substrate with steel blades.
Do I still need a scrubber if I own a floor stripping machine?
An automatic scrubber applies stripping solution and vacuums up the dirty slurry in one pass, which is why most crews run one alongside a swing machine instead of mopping the residue by hand.
What safety steps matter when using a floor wax remover machine?
Wear the personal protective equipment the chemical manufacturer specifies, keep the area ventilated, inspect power cords for damage before each use, and rinse the floor thoroughly so no residue remains under the new finish.
Match a Stripping Machine to Your Floors and Square Footage
Browse the machines above by size and power type, or tell us what you are stripping and how much of it there is. Our specialists will spec the right unit, walk you through financing, and get you a quote when you contact us.