Request a Quote
The NOBLELIFT FE4P90Q is a heavy-duty 9,000-lb lithium electric forklift designed for demanding material-handling applications where high lifting capacity, electric power, low maintenance, and smooth performance are important.
Built as a four-wheel, front-wheel-drive electric forklift, the FE4P90Q combines the rugged construction of a traditional internal-combustion forklift with the advantages of lithium-iron phosphate battery technology. Its AC drive system provides high-performance operation while helping reduce operating and maintenance requirements.
The FE4P90Q is designed for both indoor and outdoor applications, making it a versatile option for warehouses, manufacturing facilities, distribution centers, loading areas, and other heavy-duty material-handling environments.
9,000-lb rated capacity
24-inch load center
Lithium-iron phosphate battery
80V / 400Ah lithium battery
AC drive technology
Four-wheel electric design
Front-wheel drive
42-inch standard forks
2- or 3-stage mast configurations
118–236-inch lift-height range depending on mast configuration
86.6-inch collapsed mast height
105.9-inch turning radius
Solid pneumatic tires
On-demand fully hydrostatic power steering
Deluxe suspension seat
CAN-bus electronic control system
Intelligent Monitoring System (IMS)
Multi-function LED display
Operator Presence System
Side-shift
Automatic deceleration while turning
LED lighting
IP4-rated waterproof design
The FE4P90Q uses a maintenance-free lithium-iron phosphate (LiFePO4) battery with an 80V/400Ah configuration.
The battery is designed for fast charging, with NOBLELIFT specifying approximately 2–3 hours for a full charge. The battery can also be opportunity charged during breaks and shift changes, allowing the forklift to remain available for multi-shift operations without requiring routine battery changes.
The supplied battery system uses a REMA/Anderson plug-in connection, and the standard charger is an 80V/150A 480V three-phase charger.
The FE4P90Q is designed to provide the durability expected from a heavy-duty forklift while operating on electric power.
Its chassis, mast system, and front and rear axle design are engineered for demanding applications. Solid pneumatic tires provide a combination of durability and stability for indoor and outdoor use.
This makes the FE4P90Q particularly suitable for operations that need 9,000 lb of lifting capacity but want to move away from conventional internal-combustion equipment.
The FE4P90Q uses an AC drive system controlled through NOBLELIFT's InMotion CAN-bus technology.
The electronic controller regulates and monitors forklift functions to optimize AC motor performance while also providing diagnostic capabilities.
For operators and fleet managers, this combination provides smooth electric operation while giving maintenance personnel access to integrated monitoring and troubleshooting information.
Heavy-duty forklift operators can spend an entire shift inside the machine, making ergonomics an important consideration.
The FE4P90Q features a large ergonomic cab and deluxe adjustable suspension seat designed to reduce vibration and operator fatigue. The mast is also designed to provide a wide field of view during operation.
The forklift incorporates intelligent buffering when lowering the load and automatic deceleration during turns to help improve stability, safety, and operator comfort.
The FE4P90Q incorporates a number of integrated systems designed to provide information to the operator and improve machine control.
Standard features include:
Operator Presence System
Intelligent Monitoring System
CAN-bus communications
On-board diagnostics
Multi-function LED display
Low-battery reminder
Fault alarm
High, medium, and low speed modes
Automatic deceleration while turning
Safety lighting
Headlights
Front turn lights
Rear combination lights
Warning lights
The brochure also identifies wireless 4G battery monitoring and an Operator Presence System that disables travel and locks out hydraulic lift and tilt functions when the operator is not seated.
The FE4P90Q is designed with serviceability in mind.
The open design around the lifting motor and controller provides easier maintenance access and is designed to accommodate wet applications. The forklift has an IP4-rated waterproof design.
Compared with conventional internal-combustion forklifts, lithium-electric operation also eliminates many of the routine service requirements associated with an engine and fuel system.
The FE4P90Q 9,000-lb lithium forklift can be considered for businesses that need substantial lifting capacity but want the operating characteristics of an electric forklift.
Potential applications include:
Warehouses
Manufacturing facilities
Distribution centers
Building-material operations
Industrial facilities
Loading and unloading areas
Indoor/outdoor material handling
Heavy pallet handling
Multi-shift operations
For operations that routinely handle loads approaching 9,000 lb, proper capacity verification should always include the actual load center, lift height, attachments, and application conditions.
The NOBLELIFT FE4P90Q has a 9,000-lb rated lifting capacity at a 24-inch load center.
Yes. The FE4P90Q is a lithium-iron phosphate electric forklift. Its standard battery configuration is 80V/400Ah.
NOBLELIFT states that the maintenance-free lithium-iron battery can be fully charged in approximately 2–3 hours. The battery can also be opportunity charged during breaks and shift changes.
Yes. The FE4P90Q is designed for both indoor and outdoor applications and is equipped with solid pneumatic tires.
The standard battery is an 80V/400Ah lithium-iron phosphate battery.
The FE4P90Q has a 24-inch load center rating.
The FE4P90Q is available with 118-inch to 236-inch lift heights, depending on the selected mast configuration. Two-stage and three-stage mast options are available.
The standard fork length is 42 inches. Optional fork lengths are available.
Yes. Side-shift is included among the listed features for the FE4P90Q series.
The lithium battery is designed for opportunity charging, allowing the truck to be charged during breaks and shift changes. NOBLELIFT states that no battery changes are necessary for this operating approach.
The lithium battery's fast charging and opportunity-charging capability are designed to support multi-shift applications. Actual runtime will depend on load, operating conditions, duty cycle, and charging practices.
The FE4P90Q is a four-wheel, front-wheel-drive, sit-down lithium electric forklift with a 9,000-lb capacity.
The FE4P90Q is designed to provide heavy-duty forklift performance while using lithium-electric power. NOBLELIFT specifically describes the series as being built tough like an internal-combustion forklift while offering the advantages of lithium-ion power, including quiet operation and low maintenance.
The manufacturer's brochure specifies a 10-year or 20,000-hour warranty on the lithium-iron battery cells. Warranty coverage for the complete forklift and other components should be confirmed with the dealer for the specific purchase.
