5 Tips For Burnishing Floors With Floor Buffers

You might think using a floor buffer is easy. The technology has become so refined over the last few years that it’s remarkably simple to operate pretty much any late model burnisher. Considering the fact that many firms let perfectly good pieces of equipment go, anyone who has a refurbished or used piece will find operating it every bit as easy as well.

However, you’ll still want to take the time to familiarize yourself with some additional tips, since these will help to make the process more successful than you ever thought possible. We asked the pros at PS Janitorial for some tips on how to keep a floor nice and polished.

Tips For Using Your Buffing Machine For Burnishing

1. Clean the Floor Before Hand

Burnishers aren’t cleaners and they shouldn’t be used as such. Before you buff the floor, you’ll need to clean it off so that you’re not just pushing dirt around. Consider either using a traditional mop or, preferably, a floor cleaning machine to help you get the job done before hand. Once the floors are clean enough, it should be much easier to burnish them.

2. Clean Buffing Pads Regularly

Over time, the pads installed on floor buffers will start to wear out. Since they’re constantly grinding against the floor, they’re bound to get chewed up by the underlying surface. Make sure to change these when they start to get worn out. When you get refurbished floor burnishers, our team will make sure that you have the correct type of pads for them.

3. Use Softer Pads At First

Many people switch to the most aggressive pads that they have right off the bat. This is the wrong idea, however, because you want to fully cure the finish properly before you start to seriously eat into the ground using a more aggressive grit.

You need to be careful whenever you burnish a floor that’s never been fully polished in the past. Over time, you can start to use a more aggressive pad instead.

4. Use A Restoration Compound

Some people prefer polish creams while others like mop-on restorers. Regardless of which kind of compound you like personally, you’ll want to use at least some sort in many instances. That’s because this compound helps to fill minor scratches. They are then buffed out once you complete the burnishing process.

As a result, you’ll have a much more even and shiny finish on the floor as soon as you’re done. That’s especially important in larger higher-traffic areas where people often scuff up the tiles.

5. Make Sure You’re Working With The Right Kind Of Equipment

In many cases, you might be stuck using whatever burnisher you currently have in stock. If that’s anything like the situation you’re currently dealing with, then you should seriously consider replacing the equipment. You want to be certain that the burnisher that you’re working with is large enough and has enough torque to tackle the job.

Find More Buffers And Burnishers At PS Janitorial

PS Janitorial is ready to deliver on high-speed floor buffing and burnishing. A good floor finish can come from a refurbished machine, with their light model. Handle top layers of commercial floors with ease.

Anybody who is considering adding a new piece of equipment to their collection should think about getting in touch with Performance System Janitorial. Contact us online today and we’ll help you find the right piece of gear.