How To Use A Carpet Extractor
Carpeted floors can collect dust and grime easily. Tiny woven fibers will ensure that they will trap particles that you can’t see. In some cases when receiving large volumes of guests, the carpet fabric may even gain stains that no amount of elbow grease will remove.
You may need deep cleaning, with the help of a carpet extractor. You may wonder how to operate one safely. An extractor may seem daunting at a first glance.
Fortunately, the process is quite simple. You only need the machine, the appropriate cleaning solution, and instructions. PS Janitorial can provide the instructions and your extractor of choice. You mainly need to know how to operate the vacuum and the shampoo hose respectively.
Before cleaning, we recommend removing as much clutter as possible from the area and vacuum it quickly to grab the first layer of dust and dirt. That way the extractor’s energy can be focused on the tougher spots and stains. If there is more grime than usual, spray the area with a treatment to loosen the dirt particles and get a more thorough extraction. Keep the air conditioning on to ensure that the floor will dry.
Your Guide to Using a Carpet Extractor
Extractors have a solutions tank for holding a liquid that is meant to clean your floors. Follow the instructions on the proportions of the shampoo solution and water that you want to put in the tank. The wrong amounts of the solution relative to water could lead to the carpet turning gray.
If using a heated machine ensure that there’s enough time for it to power up. Run a defoaming solution through your vacuum hose to ensure that the solution doesn’t cause unwanted suds while placing on the floor and removing the shampoo rapidly. Always make sure that you don’t leave any solutions or foam on the carpet.
Once your extractor is ready, plug it into the wall. Start with the furthest part of the area and work your way backward, when using a self-contained extractor. The machine should lay down a layer of shampoo solution on the area you are wiping, use a brush to rub the dirt out of the carpet fibers, and then remove it using the vacuum hose. A heated box extractor requires you to move forward but otherwise performs the same process.
Carpet extractors vary in sizes. They cannot always clean hard-to-reach areas, however, which may prove to be a problem. You need to reach those areas using a small hand tool or a smaller extractor. Otherwise, you should be in good hands.
Get Used Carpet Extractors From PS Janitorial Today
PS Janitorial wants to provide the equipment you need to keep your floors clean. When you use one of our machines, we make sure that each one is in pristine condition. In addition to new machines, we refurbish older models so that you pay less for a perfectly-working model.
Contact us today to get started. You won’t regret having a chance to deep clean your carpets with the right extractor. Our experts will help you find the parts that you need, and how to operate safely.